Write Random - Mitsubishi Electric A800-E Instruction Manual

• Write random

The inverter writes the value in the devices with the specified numbers. The devices with non-consecutive numbers can be
specified.
• Request data
Writing data in bit units
Subcommand
H02 H14
Writing data in word units
Subcommand
H02 H14
Item
Subcommand
Number of devices for bit
access
Number of devices for word
access
Number of devices for double-
word access
Word access
Double-word access
Device No.
Device code
Set/reset
• Response data
None
Specify the devices for the specified number of devices.
Number
of devices Device
Device No.
for code
bit access
1
Specify the devices for the specified number of devices.
Number
Word access
Number
of devices
of devices
for
for
Device No.
double-word
word access
access
Specify the devices for the specified number of devices.
Specify the unit (bit/word) for writing.
Specify the number of target devices.
Specify the devices according to the number set in the request data for word access. It is not
necessary to specify the devices when "0" is set.
Specify the devices according to the number set in the request data for double word access. It is not
necessary to specify the devices when "0" is set.
Specify the number of the devices. (Refer to
Specify the type of the target devices. (Refer to
Specify ON/OFF of the bit devices.
Data to write
ON
H01 H00
(N) Operation via communication and its settings
Device
Device No.
Set/reset Set/reset
code
1
Double-word access
Device Write
Device No.
code data
1
Description
page 33.)
page 32.)
OFF
Either of the one byte numerical values is sent.
1
Device
Write data
code
Remarks
PARAMETER
2
GROUP
N
37