Download  Print this page

Introduction; Ethernet Communication Overview - Mitsubishi Electric A800-E Instruction Manual

Hide thumbs

Advertisement

Ethernet communication overview

1

INTRODUCTION

1.1
Ethernet communication overview
The FR-A800-E/FR-F800-E inverter is equipped with an Ethernet board. Communication with network devices can be made
via Ethernet by connecting an Ethernet cable to the Ethernet connector on the Ethernet board.
Precautions for Ethernet communication
• In order to protect the inverter and the system against unauthorized access by external systems via network, take security
measures including firewall settings.
• Depending on the network environment, the inverter may not operate as intended due to delays or disconnection in
communication. Carefully consider the conditions and safety for the inverter on site.
Abbreviations
Abbreviation / generic name
DU
Operation panel
Parameter unit
PU
Inverter
Ethernet board
Pr.
SLMP
iQSS
TCP/IP
UDP/IP

The solution enables seamless sensor control using a programmable controller, GOT, and other devices. The iQSS contributes to the reduction
in the total cost from development to maintenance of production equipment.
Trademarks
• Ethernet is a registered trademark of Fuji Xerox Corporation.
• MODBUS is a registered trademark of SCHNEIDER ELECTRIC USA, INC.
2
INTRODUCTION
Programmable controller
Personal computer
(FR Configurator2)
Operation panel (FR-DU08)
Operation panel (FR-DU08) and LCD operation panel (FR-LU08)
Parameter unit (FR-PU07)
Operation panel and parameter unit
Mitsubishi FR-A800-E/FR-F800-E inverter
Ethernet communication board (FR-A8ETH)
Parameter number (Number assigned to function)
Seamless Message Protocol
Mitsubishi iQ Sensor Solution
Transmission Control Protocol / Internet Protocol
User Datagram Protocol / Internet Protocol
Hub
GOT
Inverter
Description

Inverter

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F800-e