Download Print this page
Siemens NCC-G16 Installation Instructions
Siemens NCC-G16 Installation Instructions

Siemens NCC-G16 Installation Instructions

Firefinder upgrade kits

Advertisement

Quick Links

Installation Instructions

FireFinder Upgrade Kits
NCC-G16, NCC-16T
NCC-1T-UK, NCC-2T-UK, NCC-3T-UK, NCC-4T-UK
NCC-GL1
OPERATION
The FireFinder (NCC) Upgrade Kits expand the
operating parameters of an existing NCC system as
follows:
• NCC-G16: provides an existing NCC graphics
system with the capability to control/monitor
additional 16 MXL panels
• NCC-16T: provides an existing NCC text system
with the capability to control/monitor additional 16
MXL panels
• NCC-1T-UK allows an existing NCC-1T (16
node/text) to upgrade to a NCC-1G (16 node/
graphics)
• NCC-2T-UK allows an existing NCC-2T (32
node/text) to upgrade to a NCC-2G (32 node/
graphics)
• NCC-3T-UK allows an existing NCC-3T (48
node/text) to upgrade to a NCC-3G (48 node/
graphics)
• NCC-4T-UK allows an existing NCC-4T (64
node/text) to upgrade to a NCC-4G (64 node/
graphics)
• NCC-GL1 allows an existing NCC-GL system to
upgrade to a NCC-1G (16 node/graphics)
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
P/N 315-096334-2
All FireFinder (NCC) upgrade kits are compatible with
both the NCC OS/2 version and NCC NT™ version.
The minimum NCC software revision required to
recognize the NCC software upgrade keys is 2.23 for
the OS/2 version and 4.01 for the NT™ version.
FireFinder Upgrade Kits include an NCC Upgrade
Software Key and NCC Manual (not included with the
NCC-16 or NCC-GL1 series). The existing NCC
components such as NCC software program,
keyboard templates, and NCC-1F card remain the
same.
INSTALLATION
1.Your existing NCC computer should have the
original NCC software key plugged into the LPT
2 port as shown in Figure 1 on the next page.
2.Insert your NCC upgrade software key directly
into the existing NCC software key. Secure key
connection with screw terminals. See Figure 2
on the next page.
3.Once the NCC upgrade software key is securely
attached to the original NCC software key, reboot
the computer.
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN

Fire Safety

Advertisement

loading

Summary of Contents for Siemens NCC-G16

  • Page 1: Fire Safety

    NCC software upgrade keys is 2.23 for the OS/2 version and 4.01 for the NT™ version. • NCC-G16: provides an existing NCC graphics system with the capability to control/monitor FireFinder Upgrade Kits include an NCC Upgrade additional 16 MXL panels Software Key and NCC Manual (not included with the NCC-16 or NCC-GL1 series).
  • Page 2 3. NFPA 72 Proprietary and Local System installation requires that the computer, monitor, and printer be UL rated for fire See Notes 3 and 4 (SIEMENS Models SCD550, SCD550T, SCD19M, SCD19TM, SCD21M, SDC21TM and PAL-1, respectively). Elo Touch Screen Computer (rear view) Controller Card 4.
  • Page 3 4.To reboot the NCC computer, first press the Alt + In this window, you will see the statement: If you F4 keys simultaneously to close the NCC program. do not want to restart the NCC, hit CTRL-C. The following window pops up: Press the Ctrl key and the C key simultaneously.
  • Page 4 If you are installing any of the NCC-T-UK series, you If the NCC Key Model number is accurate, please will need to enable the graphics display option. To contact Siemens, Fire Safety Technical Support enable the graphics display option, hit the MORE Department at 1-800-248-7976.

This manual is also suitable for:

Ncc-16tNcc-1t-ukNcc-2t-ukNcc-3t-ukNcc-4t-ukNcc-gl1