Advertisement
R.H. FOOTREST
DISCHARGE
GUARD
MOWER
HOUSING
FIGURE 5
FIGURE 6
CLAMPS
FIGURE 7
10. Place L.H, baffle (Fig. 4) on lip of mower housing.
Secure L.H. runner to L.H. baffle and mower hous-
ing using: two 5/16 carriage bolts and two 5/16
locknuts
(shown full size below).
NOTE: Do not
tighten.
L.H, baffle and hardware
furnished
with
bagger.
1 1. Using a 1/2" wrench remove hardware
"'D" (Fig.
5 - Inset) securing discharge guard to mower hous-
ing. Hardware may be discarded,
1 2, Using a 1/2"' wrench remove hardware
"'A",
"'B"
and "'C" (Fig, 6) securing R.H. runner to mower
housing.
Hardware may be discarded.
1 3. Place R.H. baffle (Fig. 4) on lip of mower housing.
Secure R.H, runner to R,H. baffle and mower hous-
ing using: one 5/16 carriage bolt and one 5/16
locknut
(shown
full size below).
NOTE: Do not
tighten.
R.H, baffle and hardware
furnished
with
grass catcher.
14. Secure L,H. baffle and R.H. baffle to mower hous-
ing using: four clamps, four 1/4 hex bolts and four
1/4 Iocknuts
(shown futl size below).
Clamps and
hardware
furnished
with grass catcher,
I tlll!!lllltllllJi
a. Place clamps
(Fig. 7) overholes
in L.H. and R, H.
baffles
(Fig,
7).
Bolt
heads
to
underside
of
mower
housing,
Tighten
securely.
NOTE:
Tighten
hardware
assembled
in
step
10
securely.
1 5. Assemble
latch assembly
to top of R.H. runner
(Fig.
8) using:
two
5/16
carriage
bolts
and two
5/16
Iocknuts
(shown
full
size below).
Bolt
heads
to
underside
of mower
housing,
NOTE: Do not tighten.
Latch
assembly
and hardware
furnished
with grass
catcher,
©
- 6 -
Advertisement
