Table of Contents
Advertisement
storage position.
4. Your treadmill should now be in its desired location.
Please always take caution if moving the treadmill upstairs or to a new property or out building etc.
For such moves it is always recommended to instruct a qualified engineer from Branx Fitness (at a
cost) or to disassemble the treadmill safely to assume the flat packed position and refit assembly
brackets and screws etc before attempting to lift, as recommended in the set up instructions
section. The treadmill should also be secured into the original packaging for significant moves to
ensure no damage comes to the treadmill.
HOW TO LOWER (RELEASE) THE TREADMILL FOR USE
1. Ensure that the area in which your treadmill running deck will occupy in its unfolded state
is clear, clean and flat.
2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
CAUTION:
your legs and keep your back straight.
3. Push gently against the fixed running deck in the direction of the console to remove the
load from the strut
4. On the release, the treadmill running deck hydraulic strut will take care of the rest,
ensuring a safe, smooth, quiet and controlled decent of the running deck without any
guidance required from the user.
5. The treadmill should now be ready to use.
To decrease the possibility of injury, bend
Page 26
www.branxfitness.co.uk/productsupport
MAINTENANCE INSTRUCTIONS
If you prefer to see all in video format please visit: http://www.branxfitness.co.uk/video-tutorials
for all our video tutorials of general maintenance etc and for all FAQ's (frequently asked questions)
Your treadmill is an advanced electromechanical device that delivers high performance exercise
options for you. To ensure the treadmill does you well it is imperative that you carry out the
cleaning and maintenance operations as outlined in this section. If in any doubt and after
watching our video tutorials etc you still feel you are uncomfortable or not willing to carry out these
procedures you can email us at: service@branxfitness.co.uk and we can arrange for one of our
fully qualified technicians to visit you and do what is required. There will be a charge for this and
our team will advise you of this beforehand at all times.
Reasonable cleaning/lubricating should be made to extend the lifetime of your treadmill.
Performance is maximised when the belt and mat are kept as clean as possible.
WARNING: THE BELT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION
AND LIFE OF YOUR TREADMILL AND THAT IS WHY WE RECOMMEND YOU CONSTANTLY
LUBRICATE THIS FRICTION POINT TO PROLONG THE USEFUL LIFE OF YOUR TREADMILL.
FAILING TO DO THIS MAY VOID YOUR WARRANTY.
WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE
WARNING: STOP TREADMILL BEFORE FOLDING
Placement in your Home
This treadmill should not be placed outdoors, in a garage or an outbuilding. Keep the treadmill in
a dry place with as little temperature variation as possible. We recommend placing a mat beneath
the treadmill, to protect both the treadmill and your flooring.
Care & Maintenance
Always place the equipment in a dry environment.
Use a warm, damp cloth to keep the product clean.
No wet cleaning of electrical components. Unplug before any care and maintenance.
The safety level of the equipment can be maintained only if it is regularly examined for damage
and wear. This includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels,
bearings & connection points etc.
Ensure that you inspect the product regularly-at least once a week is recommended.
Ensure that all fixings are tight before use.
Always replace damaged/worn components with original parts from the manufacturer.
Lubrication
An insufficiently lubricated deck will cause the belt, running deck and motor to wear out much
quicker. How often you should lubricate depends on usage, we recommend the following:
•
Light use (less than 3 hours a week) –every 8 months
•
Medium use (3 to 5 hours a week) –every 4 months
Page 27
www.branxfitness.co.uk/productsupport
Hide quick links:
Advertisement
Table of Contents
