used in accordance with this installation manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution: If the user makes changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The UL symbol on the TS3000 Regulatory Label means that the product is
listed by Underwriter's Laboratories, Inc. It is designed and manufactured to
meet rigid UL safety standards against X-radiation, ﬁre, casualty, and electrical
The following are statements required for UL certification, related to safety
procedures that must be adhered to during installation.
If wiring for a Control Station exits a building, the wiring must be protected at
both ends by a Quick Clip Fuse from Reliable Electric, model number RSCP-2.
Follow these general precautions while installing telephone equipment:
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is speciﬁcally
designed for wet locations.
Never touch uninsulated telephone wires or terminals unless the tele-
phone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
What is UTAM?
UTAM (Unlicensed Transition & Management for Microwave Location) is an
organization which is composed of 15 companies in the United States that
coordinates the relocation of existing microwave incumbents and manages the
unlicensed 1.9 GHz frequency range. UTAM is responsible for establishing
and enforcing policies and procedures to ensure that deployment of Unli-
censed Personal Communication Systems (UPCS) causes no interference to the
incumbent microwave community. It also works to eventually move all micro-
wave users out of the UPCS band.
Motorola was a founding member of the organization and continues to be
Zone 1, Zone 2, & Zone 3 Unclassiﬁed
Counties throughout all of the United States are designated as Zone 1, Zone 2
or Zone 3/Unclassified, based on the status of microwave link incumbents
within each county. UTAM procedures are both zone dependent & zone inde-
pendent, and are detailed in the next sections.
A county is designated as Zone 1 because all microwave incumbents have
A county is classified as a Zone 2 county when any microwave incumbents
have not been cleared and continue to operate in the county.
Telario TS3000 Control Station Installation Manual