Download  Print this page

Replacement And Care Of Filters - Kenmore 758.144151 Owner's Manual

Whole house humidifier 13 gallon output
Hide thumbs

Advertisement

Replacement
and Care of Filters (continued) m
c, Install new filters in the filter housing
track with the glue beads of the wick-
ing pad to the inside of the filter hous-
ing.
d. Return
the top
cover
of the filter
housing by installing the cover over
the fixed tabs on the rear of the lower
filter housing and pivoting
the cover
down over the top of the filters, Snap
the cover over the two spring tabs.
e. Replace the filter housing in the cab-
inet. Note: There is a left and a right
filter housing.
There is also a front
and back orientation.
To position the
filter housings correctly:
- Make sure the two indents in the
cylinder section of the top covers are
positioned
towards the center of the
cabinet.
Fixed Tabs
Spring Tabs
_J
Humidifier
• Be sure that the spring tabs of filter
housings
are towards front of cabi-
net.
• Align the lower portion of the filter
assembly over the six ribs located at
the boilom rear of the humidifier cab-
inet.
Top
indents
Cover
Towards
Center of
Cabinet
f. Position fan assembly onto the cabi-
net. Make sure the fan venturi
(low-
est cylinder section below the fan) is
placed inside the filter housing,
g. Replace water bottles.
h. Close the pivoting lid.
i. The unit is ready for use or to be
stored away for next season.
NOTE:
For correct
operation
of the filter
housing assembly, filters must be fully con-
tained inside the flange of the top cover.
Fiat Portion of Filter Housing
Towards
Back of Cabinet
Indents Toward Center of Cabinet
Step 4 e.
10

Advertisement

Table of Contents
loading

  Related Manuals for Kenmore KENMORE 758.144151

This manual is also suitable for:

Quiet comfort 758.144151