Reference the unlocking instructionson
the upper carton flaps of the shippingcar-
ton your Kenmore humidifierwas received
in. The casters and hardware are inside
k • :...........
: _'i/¸!':I'•'/:•: ¸: : : •_
•i ¸ •I • .
NOTE: Only two of the four holes in the
caster plate will align for proper caster
Carefully place your humidifier upsiCe
down on a soft surface such as a rug or
carpet. Locate the screwy holes on the bot-
tom comersof the cabinet.
Each caster should be attached with two
(2) screws placed diagonally from each
other. Turn the unit uprightand you willbe
ready to position your humidifier in the
locationof your choice.
For your own safety,
do not use
humidifier if any parts are damaged
Place humidifier in area of house where
most humidity is needed, or one which
would likely resultin moist air being circu-
lated throughoutthe house such as near a
cold air return. Moist air (humidity) pro-
duced will dispeme into the whole house,
but area closestto unit will have the high-
The humidifiermay be positionedwith the
back (cord exit side), or left side (side
opposite hinged lid) flush to the wall, or
away from the wall. Air needs to enter
through louversin the hingedaccess lid in
order for humidifierto operate at peak effi-
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air
away from home thermostat, it Is best
to position humidifier next to an inside
wall. Hot air registers and cold air from
outside walls can affect the efficiencies
of the controls.
Unit should not be
placed where warm air from a hot air
register blows directly on unit.
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall.. Plug in the electrical cord.
I III II
....................... WARNING ...........
To avoid fire or shock hazard, humidi-
fier, should be plugged into a 120V
Do not use extension
lhumidifier before filling, cleaning, or !
Raise the hinged access lid and note the
locationof the controlstowards the rear of
the humidifier(Figure 3).
Figure 3 HOLE