Sears 583.3565 Operating & Maintenance Instructions
Sears 583.3565 Operating & Maintenance Instructions

Sears 583.3565 Operating & Maintenance Instructions

Heater sizes: 35,000 55,000 and 110,000 btu/hr

Advertisement

OWNER'S
MANUAL
MODEL
NUMBERS:
583.356500
583.356820
583.356830
SERIAL NO.
(owner - write in No.)
CAUTION:
Read Rules for
Safe Operation
and Instructions
Carefully
SAVE THIS MANUAL
FOR
FUTURE
REFERENCE
35,000
Heater Sizes:
55,000
and 110,000 Btu/Hr
Operation and Maintenance
Instructions with Parts List
Sold by Sears, Roebuck
and Co., 3333 Beverly Road, Hoffman
Estates,
IL 60179

Advertisement

Table of Contents
loading

Summary of Contents for Sears 583.3565

  • Page 1 (owner - write in No.) CAUTION: Read Rules for Safe Operation and Instructions Carefully SAVE THIS MANUAL FUTURE REFERENCE Sold by Sears, Roebuck Heater Sizes: 35,000 55,000 Operation and Maintenance Instructions with Parts List and Co., 3333 Beverly Road, Hoffman and 110,000 Btu/Hr Estates,...
  • Page 2: Table Of Contents

    Wiring Diagrams Accessories Maintenance Illustrated Wheels and Handle Parts List (110,000 How To Order Parts ... Sears will repair any defect in material in this portable heater at no charge. heater is used for commercial service is available by simply returning gives you the specific legal rights, and you may and Co., 3333 Beverly Road, Hoffman...
  • Page 3 SAFETY INFORMATION 100506 WARNINGS IMPORTANT: Read this owner's before trying to assemble, operate, of this heater cause serious explosion, electrical shock, and carbon Carbon monoxide Carbon Monoxide Poisoning: resemble the flu, with headaches, dizziness, heater may not be working properly. Some people are more affected by carbon monoxide pregnant...
  • Page 4: Safety Information

    SAFETY INFORMATION PRODUCT IDENTIFICATION Continued ° Use only with the electrical voltage and frequency specified on model plate. ° Use only a three-prong, grounded extension cord. ° Minimum heater clearances from combustibles: Outlet: 8 Ft. Sides: 4 Ft. ° Locate heater on a stable and level surface while hot or running or a fire may occur. °...
  • Page 5: Unpacking

    UNPACKING ASSEMBLY (For 110,000 Btu/Hr Model Only) 100506 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for shipping damage. If heater is damaged, where you bought heater. This model is furnished with wheels and a handle.
  • Page 6: Theory Of Operation

    THEORY OF The Fuel System: pushed through OPERATION A fine mist of fuel is sprayed into the combustion The Air System: the combustion The Ignition The spark plug ignites the fuel and air mixture. The Flame-Out if the flame goes out. Clean Heated Air Out...
  • Page 7: Ventilation

    VENTILATION OPERATION 100506 Follow the minimum fresh, outside requirements. If proper fresh, provided, carbon monoxide proper fresh, outside air ventilation Provide a fresh air opening of at least three square feet for each 100,000 Btu!Hr rating. Provide extra fresh air if more heaters Example: A 110,000 Btu!Hr heater requires •...
  • Page 8: Storing, Transporting, Or Shipping

    OPERATION Continued STORING, TRANSPORTING, OR SHIPPING PREVENTATIVE MAINTENANCE SCHEDULE To Stop Heater Unplug extension cord from outlet. To Restart Heater Wait 2 minutes after stopping heater. Repeat steps under To Start Heater, page 7. Note: If shipping, transport companies Drain fuel tank. Note: Some models have drain plug on underside drain plug to drain all fuel.
  • Page 9: Troubleshooting

    TROUBLE- SHOOTING 100506 Never service heater while hot. Severe burns and electrical POSSIBLE CAUSE OBSERVED FAULT Wrong pump pressure Heater ignites, but flame-out control shuts off heater after Dirty air output, air intake a short period of and lint filters time.
  • Page 10: Service Procedures

    SERVICE PROCEDURES Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. IMPORTANT: Remove fan from motor shaft before removing motor from heater.
  • Page 11: Pump Pressure Adjustment

    Pump Pressure Adjustment 1. Remove pressure gauge plug from filter end cover. 2. Install accessory pressure gauge (part number 583.35802). 3. Start heater (see Operation, page 7). Allow motor to reach full speed. 4. Adjust pressure. Turn relief valve to right to increase pressure. Turn relief valve to left to decrease pressure.
  • Page 12: Spark Plug (110,000 Btu!Hr Model)

    11.Tighten spark plug with spark plug mounting nut. 12.Release hex-body of spark plug from vise. 13.Replace burner strap onto combustion chamber. 14.Attach spark plug wire to spark plug. 15.Attach fuel and air line hoses to nozzle assembly. 16.Replace fan (see page 10). 17.Replace fan guard and upper shell.
  • Page 13: Nozzle (110,000 Btu!Hr Model)

    Nozzle (110,000 Btu/Hr Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 10). 3. Remove fuel and air line hoses from burner head. 4. Remove spark plug cable from spark plug. 5. Remove spark plug from burner head using 13/16"...
  • Page 14: Specifications

    (Pump Rotor, continued) 10.Install blades, pump plate, air filters, and filter end cover. 11.Replace fan guard and upper shell. 12.Adjust pump pressure (see page 11). Note: If rotor is still binding, proceed as follows: 13.Perform steps 1 thru 6 (see page 13). 14.Place fine grade sandpaper (600 grit) on flat surface.
  • Page 15: Accessories

    ACCESSORIES Purchase these accessories from your local Sears store. MAINTENANCE KITS 100506 AIR GAUGE KIT- 583.35802 For all models. Special tool to check pump pressure. Btu/Hr 35,000 HA2210 Fuel Tank Filter Screen HA3004 Rotor/Air Pump Kit Filter Kit HA3014 HA3020...
  • Page 16: Illustrated Parts Breakdowns And Parts Lists

    ILLUSTRATED PARTS BREAKDOWN Sears Portable Heater Model 583.356500 35,000 Btu/Hr 10050d...
  • Page 17 PARTS LIST Sears Portable Heater Model 583.356500 35,000 Btu/Hr PART DESCRIPTION NUMBER M51104-01 Handle 098511-156 Upper Shell M11084-29 Screw, #10-16 x 3/4" M 15823-27 Screw, #10-16 x 1/2" 098512-05 Combustion Chamber M 10908-2 Screw, #6-32 x 3/8" M16660 Photocell Bracket...
  • Page 18 ILLUSTRATED PARTS BREAKDOWN Sears Portable Heater Model 583.356820 55,000 Btu/Hr 21-- " ... 10050d...
  • Page 19 PARTS LIST Sears Portable Heater Model 583.356820 55,000 Btu/Hr PART NUMBER DESCRIPTION M51104-01 Handle 098511-156 Upper Shell M11084-29 Screw, #10-16 x 3/4" M 15823-27 Screw, #10-16 x 1/2" 098512-32 Combustion Chamber M 10908-2 Screw, #6-32 x 3/8" M16660 Photocell Bracket...
  • Page 20 ILLUSTRATED PARTS BREAKDOWN Sears Portable Heater Model 583.356830 110,000 Btu/Hr 10050d...
  • Page 21 PARTS LIST Sears Portable Heater Model 583.356830 110,000 Btu/Hr PART NUMBER DESCRIPTION 098511-158 Upper Shell M 15823-27 Screw, #10-16 x 1/2" 098512-31 Combustion Chamber M16660 Photocell Bracket M 10908-2 Screw, #6-32 x 3/8" HA3019 Photocell Assembly Burner Head Assembly HA3022...
  • Page 22: Wheels And Handle Parts List (110,000 Btu!Hr Model)

    WHEELS AND HANDLE PARTS LIST For 110,000 Btu/Hr Model PART PART NUMBER DESCRIPTION HA2203 Handle M12345-33 Screw, #10-24 x 1 3/4" M12342-3 Wheel Support Frame NTC-3C Lock Nut, #10-24 097896-01 Wheel M28526 Cap Nut M51015-01 Axle M51123-01 Tube Cap 7 \\\ 110,000 QTY.
  • Page 23 NOTES 100506...
  • Page 24 REPAIR PARTS MODEL NUMBERS: 583.356500 583.356820 583.356830 Sold by Sears, Roebuck and Co., 3333 Beverly Road, Hoffman Estates, SEARS PORTABLE HEATERS Now that you have purchased exist for repair parts or service, Be sure to provide all pertinent serial number of your portable side of the Heater.

This manual is also suitable for:

583.35682583.35683583.356500583.356820583.356830

Table of Contents