RF Radiation exposure statement
Communication network statement
Relative operating humidity
Relative storage humidity
Mode of operation
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Do not attempt to repair or modify this equipment. Any repairs or
alterations made by the user to the equipment may void the warranty
and compliance of the equipment. Changes or modifications made to
this equipment not expressly approved by Philips may void the FCC
authorization to operate this equipment.
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. For wrist-worn operation, this
equipment has been assessed and meets the FCC RF exposure
guidelines for portable devices.
The emergency call system must not share its communication network
with any other network or system. All devices connected directly to
the wiring of a hardwired system, and all transmitters using the same
frequency or channel and that are within range of a receiver of a
wireless system, must be compatible with the emergency call system
and evaluated for the intended purpose. Supplementary devices not
evaluated for the intended purpose are permitted only if their
connection to the network utilizes a compatible device evaluated for
From 5 °C to + 40 °C (From 41 °F to 104 °F).
From 15 % to 90 % (non-condensing).
From 700 hPa to 1060 hPa.
From -25 °C to +70 °C (-13 °F to +158 °F).
Up to 90 % (non-condensing).
Internally powered, CR2032 Lithium 3V battery, non-