FISCHER ME01 Series Data Sheet And Operating Manual

d e v e l o p i n g s o l u t i o n s
Data Sheet and Operating Manual
ME01 Digital manometer
ME01 ## # 87 # HL R####
Gas explosion protection zone 2
Table of Contents
1

Safety guidelines

2 Application Purpose
3 Product And Function Description
4 Installation And Assembly
5 Commissioning
6 Maintenance
7 Transportation
8 Service
9 Accessories
10 Waste disposal
11 Technical Data
12 Dimensional drawings
13 Order Codes
14 Attachments
1 Safety guidelines
1.1 General Information
This operating manual contains instruc-
tions fundamental to the installation, op-
eration and maintenance of the device
that must be observed unconditionally. It
must be read by the assembler, operator and the
specialized personnel in charge of the instrument
before it is installed and put into operation. This op-
erating manual must always be accessible at the
place of installation.
The subsequent sections on general safety instruc-
tions 1.2 - 1.7 as well as the following special in-
structions ranging from intended use to disposal 2-
10 contain important safety instructions the non-
observance of which can cause danger to persons,
animal and physical objects.
1.2 Personnel Qualification
The instrument may only be installed and commis-
sioned by specialized personnel familiar with the in-
stallation, commissioning and operation of this
product.
Specialized personnel are persons who can assess
the work they have been assigned and recognize
potential dangers by virtue of their specialized train-
ing, their skills and experience and their knowledge
of the pertinent standards.
For explosion-proof models the specialized person-
nel must have received special training or instruc-
tion or be authorized to work with explosion-proof
instruments in explosion hazard areas.
1.3 Risks due to Non-Observance of Safe-
ty Instructions
Non-observance of these safety instructions, the in-
tended use of the device or the limit values given in
the technical specifications can be hazardous or
cause harm to persons, the environment or the
plant itself. The supplier of the equipment will not be
liable for damage claims if this should happen.
1.4 Safety Instructions for the Operating
Company and the Operator
The safety instructions governing correct operation
of the instrument must be observed. The operating
company must make them available to the installa-
tion, maintenance, inspection and operating per-
sonnel. Dangers arising from electrical components,
energy discharged by the medium, escaping medi-
um and incorrect installation of the instrument must
be eliminated. The particulars can be
found in the respective regulations
such as DIN, EN, explosion hazard,