Turn The Radio On/Off; Adjust The Volume - Motorola Spirit GT Instruction Manual

Hide thumbs Also See for Spirit GT:
Table of Contents

Advertisement

FCC ID: AZ489FT4833
Note: Remove batteries before storing your radio for extended periods. Batteries corrode over
time and may cause permanent damage to your radio.

Turn the Radio on/Off

Turn the On-Off/Volume know clockwise. You will hear a beep and see the Transmit Light flash
momentarily to indicate the radio is on. To turn the radio off, turn the On-Off/Volume knob
counterclockwise. You will hear a click to indicate the radio is turned off.

Adjust the Volume

Hold Monitor button down to listen to audio level while rotating On-Off/Volume knob. Rotate
clockwise to increase and counterclockwise to decrease volume.
To Send/Receive Messages
Check channel activity by pressing Monitor button. You will hear static if the channel is clear to
use. Do not transmit if someone is talking on the channel.
1. To send messages, press Push-To-Talk and speak into radio. (To maximize clarity, hold radio
2.5 to 5 cm from mouth).
2. The Transmit Light will glow continuously when sending messages.
3. To listen for messages, release the Push-to Talk button.
Scan (Spirit GT 2 Channel Model only)
Scan allows you to monitor channels and codes of other transmitting radios. When the ratio
detects channel activity, it stops scanning and locks in on the active channel and code. It allows
you to listen and talk back to the person (s) transmitting without having to switch channels.
Note: To scan for radios without Interference Eliminator Codes, change your code to zero (off)
before starting scan.
Call
Spirit GT radios have five unique call tones to identify each user and alert others that you intend
to transmit. Press the Call button and all users on your channel and code will be alerted with our
call tone.
Hands Free Use
Spirit GT radios have built-in Voice Operated Transmission (VOX) capability. This means the
sound of your voice activates transmission when the radio is used and accessory ( Model ###,
Sold separately).
To use the VOX feature:
1. Make sure the radio is off.
2. Plug accessory's connector into jack on the left hand side of the radio.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents