Before You Begin - Honeywell Lyric LCP300-L Quick Installation Manual

Installing the Lyric Gateway (Continued) ) ) ) Installing the Lyric Gateway (Continued Installing the Lyric Gateway (Continued Installing the Lyric Gateway (Continued
WALL
SURFACE
MOUNTING
SCREW
(4) TYP.
REAR
COVER /
MOUNTING
BRACKET
TAMPER
SCREW
Installing & Connecting the Lyric Gateway Installing & Connecting the Lyric Gateway Installing & Connecting the Lyric Gateway Installing & Connecting the Lyric Gateway
7. Within approximately 3 minutes the Gateway will confirm its connection to the WiFi network.
8. Change the Wi-Fi setting of the set up device, to the Gateway AP. Select "OPTGW_####" (#### = Last 4
digits of the Gateway MAC ID#)" from the list of options. Enter the Gateway's 8-digit, case sensitive, WPA2
password when prompted and select OK/Done.
9. Open the AlarmNet 360 App on the set up device and select "Manage Lyric Gateway".
10. The Configure Panel WiFi, Transfer Firmware and Transfer Panel Configuration options appear:
a. Select Configure Panel WiFi to connect the Gateway to the customer's router.
Enter the customer's SSID and WPA2 password when prompted.
b. Select Transfer Firmware to transfer the latest firmware to the Gateway.
c. Select Transfer Panel Configuration to transfer the panel configuration set up in AlarmNet 360 to the Gateway.
11. Select "Finish" to connect the Gateway to the smart device.
12. Select "Save" to return to the Home Screen.
Programming Program Program Program ming the ming ming the the the Lyric
The Lyric Gateway is programmed via AlarmNet 360
device. There are numerous options for programming the Gateway, Sensors, Wireless Keys and Keypads and
accessories.

Before you begin

Before you begin Before you begin Before you begin
1. Log on to the AlarmNet 360
Name and Password, to Program the Lyric Gateway, Sensors and Communications Modules.
Programming Programming
Programming Programming
1. Select the "Device Programming" option then select the "Lyric Gateway" button and enter the required
information.
2. When programming is complete select "Sync" to send the information to the gateway.
Selecting a Default Configuration Selecting a Default Configuration
Selecting a Default Configuration Selecting a Default Configuration
The Lyric Gateway is pre-programmed at the factory with a built-in set of default values. Refer to the Programming
Default Values section to view the pre-programmed values.
REAR COVER /
MOUNTING
BRACKET
SCREW
1
I I I I nstalling the Desk Mount nstalling the Desk Mount nstalling the Desk Mount nstalling the Desk Mount
Lyric Lyric Lyric Gateway Gateway Gateway Gateway
TM
website (http://alarmNet360.com) or the AlarmNet 360 app, with your User
RJ45 ETHERNET
RECEPTACLE
MICROSWITCHES
2
TM
using a laptop, smart phone or other internet connected
- 2 -
POWER SUPPLY
RECEPTACLE
Microswitch Functions Microswitch Functions
BATTERY Microswitch Functions Microswitch Functions
RECEPTACLE
Location Location Location Location
DETAIL A
1
2
Wiring Table Wiring Table Wiring Table Wiring Table
Maximum Distance Maximum Distance Maximum Distance Maximum Distance
Between Power Between Power Between Power Between Power
Supply and Supply and Supply and Supply and Wire Wire Wire Wire
Gateway Gateway Gateway Gateway Gauge Gauge Gauge Gauge
Up to 8 ft (2.44 m) # 22
Up to 13 ft (3.96 m) # 20
Up to 20 ft (6.1 m) # 18
Recessed Recessed Recessed Recessed
Function Function Function Function
Left Factory Default
Center Reboot
Right (WPS)