WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call
INSTALLING/REPLACING THE AAA BATTERY
See Figure 1.
One AAA battery is preinstalled in the unit. Before first use,
locate and remove the red pull tab to activate the battery.
Remove the battery cover by inserting the edge of a coin
into the slot on the bottom and twisting.
Install the battery according to the polarity indicators.
Replace the battery cover, making sure the notches
align, and press it securely into place.
Do not use the product without the battery cover in-
stalled.
NOTE: Remove the battery for storage when device will
not be used for long periods of time.
PAIRING THE DEVICE TO YOUR SMARTPHONE
Select and open the RYOBI
Open the MOISTURE METER app segment.
Press and hold the ON/OFF button until the LED light
starts to flash.
Select the moisture meter under the list of devices
shown on the app.
NOTE: If you do not see the moisture meter listed, se-
lect scan in the app. Select the device.
USING THE MOISTURE METER
See Figure 2.
WARNING:
The electrode measurement pins are extremely sharp.
Use care when handling this device. Cover the pins with
the protective cap when the device is not in use.
Select and open the RYOBI
Tap Material on the app screen and choose the applica-
ble material from the list.
Remove the electrode cover.
Insert the electrode measurement pins into the material.
App images may vary.
ASSEMBLY
1-877-578-6736
OPERATION
Phone Works
app.
™
™
Phone Works
app.
™
™
4 – English
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
for assistance.
Fig. 1
Fig. 2
BEECH
Select material
Quick reference scale
Graph moisture levels
Allow a few seconds for the device to process the mea-
surement.
QUICK REFERENCE SCALE
Shows the moisture level at a glance:
GREEN: Selected material is suitably dry for its intended
purpose.
YELLOW: Moisture content is higher than normal, but
may be acceptable for use.
RED: Moisture content is too high for most purposes.