Download Print this page

Electrical Safety - Husqvarna MP 250 S Operator's Manual

Hide thumbs

Advertisement

Table of Contents
4
Handling – transport
• The machine rolls on its wheels when the front is
lifted slightly. Two workmen are required when
crossing different levels.
• Hands should be placed on the front hub (A) and
at the back of the machine (B). During this
manoeuvre, the plate remains on the floor (see
FIG. 2)
B
FIG. 2
5
Inspection before starting
Please read the instructions for use
prior to operating the machine for
the first time.
The
working
completely cleared, well lit and all
safety hazards removed (no water or
dangerous objects in the vicinity).
The use of ear protection is
mandatory.
The operator must wear
protective clothing appropriate
to the work he is doing. We
recommend that this includes
both eye and ear protection
Any persons not involved in the
work should leave the working area.
It is essential to use genuine original
plates. Plates having a shape, size
or mounting method which does not
suit the machine must never be
used.
The
manufacturer
responsibility for loss or damage
resulting from misuse or any
modification, alteration or powering
that does not conform to the
manufacturer's original specifications.
A
area
must
be
declines
all
6
Electrical connection

- ELECTRICAL SAFETY :

Operate this machine only on a
supply equipped with a 30 mA
earthed current-limiting circuit-
breaker. Otherwise, consult our
catalogue for appropriate models.
- Make sure that the mains voltage
corresponds with that marked on the
manufacturer's plate on the machine.
- Three-phase motor:
Ensure that the direction of rotation
matches the direction of the arrow
marked on the motor cover: if the
motor does not turn in the desired
direction, reverse the two power
supply wires:
- Use single-phase plugs of the 2P + E
type or three-phase plugs of the 3P +
N + E type, depending on the voltage
2 P + T
concerned.
400 V
230 V
H07 - RNF
H07 - RNF
3 x 2,5
2
4 ou 5x1,5
2
+ (x2)
+ (x2)
50 M
100 M
- Extension cable: use a cable section suitable for
the electrical output; connect to the main supply
with a H07 RNF type cable with a section of:
3 x 2.5mm_ up to 50m for 230V.
4 or 5 x 1.5mm_ up to 100m for 400V.
31

Advertisement

Table of Contents
loading

  Related Manuals for Husqvarna MP 250 S

  Related Content for Husqvarna MP 250 S