Seagate CONSTELLATION ST9160511NS Product Manual
  1. Manuals
  2. Brands
  3. Seagate Manuals
  4. Storage
  5. ST9160511NS - Constellation 7200 160 GB Hard...
  6. Product manual
Seagate CONSTELLATION ST9160511NS Product Manual

Seagate CONSTELLATION ST9160511NS Product Manual

Constellation serial ata
Hide thumbs Also See for CONSTELLATION ST9160511NS:
Table of Contents

Advertisement

Quick Links

Download this manual
Product Manual
Constellation
ST9500530NS
ST9160511NS
100538694
Rev. D
February 2011
Serial ATA
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CONSTELLATION ST9160511NS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Seagate CONSTELLATION ST9160511NS

Summary of Contents for Seagate CONSTELLATION ST9160511NS

  • Page 1 Product Manual Constellation Serial ATA ® ST9500530NS ST9160511NS 100538694 Rev. D February 2011...

  • Page 2: Revision History

    States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.

  • Page 3: Table Of Contents

    Seagate Technology support services ........
  • Page 4 Constellation Serial ATA Product Manual, Rev. D...

  • Page 5: List Of Figures

    Figure 1. Typical 5V/12V startup and operation current profile for ST9500530NS ....12 Figure 2. Typical 5V/12V startup and operation current profile for ST9160511NS ....12 Figure 3.

  • Page 7: Seagate Technology Support Services

    Global Support Services telephone numbers & business hours Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit For Seagate OEM & Distribution partner portal, visit For Seagate reseller portal, visit http://spp.seagate.com Constellation Serial ATA Product Manual, Rev. D http://www.seagate.com/www/en-us/about/contact_us/ http://www.i365.com...
  • Page 8 Constellation Serial ATA Product Manual, Rev. D...

  • Page 9: Introduction

    Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Constellation Serial ATA model drives: ST9500530NS ST9160511NS These drives provide the following key features: • 7200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second).

  • Page 10: About The Serial Ata Interface

    About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. •...

  • Page 11: Drive Specifications

    Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST9500530NS ST9160511NS Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements.
  • Page 12 Table 1: Drive specifications summary for 500 and 160 GB models Drive specification Formatted Gbytes (512 bytes/sector)* Guaranteed sectors Heads Discs Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density, KBPI (kbits/in max) Track density, KTPI (ktracks/in avg.) Areal density, (Gbits/in avg) Spindle speed (RPM)
  • Page 13 To determine the warranty for a specific drive, use a web browser to access the following web page :http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance From this page, click on the “Verify Your Warranty” link. You will be asked to pro- vide the drive serial number, model number (or part number) and country of pur- chase.

  • Page 14: Formatted Capacity

    Formatted capacity Formatted Model capacity* ST9500530NS 500 Gbytes ST9160511NS 160 Gbytes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 3.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above.

  • Page 15: Physical Characteristics

    Physical characteristics Weight: (maximum) ST9500530NS ST9160511NS Cache buffer Note. Refer to Figure 5, page 23 for detailed mounting configuration dimensions. Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: •...

  • Page 16: Power Specifications

    Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4, page 22 on page 22. 3.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature.
  • Page 17 Parameter Voltage Regulation Average Idle Current Advanced Idle Current Idle_A Idle_B Idle_C Standby Average Sleep Current Maximum Start Current: DC (Peak DC) AC (Peak AC) Delayed Motor Start (DC max) Peak Operating Current (random read): Typical DC Maximum DC Maximum DC (peak) Peak Operating Current (random write): Typical DC Maximum DC...

  • Page 18: Figure 1. Typical 5V/12V Startup And Operation Current Profile For St9500530Ns

    3.8.1.1 Typical current profiles Figure 1. Typical 5V/12V startup and operation current profile for ST9500530NS Figure 2. Typical 5V/12V startup and operation current profile for ST9160511NS Constellation Serial ATA Product Manual, Rev. D...

  • Page 19: Conducted Noise

    3.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz.

  • Page 20: Power-Management Modes

    3.8.4 Power-management modes PowerChoice power management Drives using the load/unload architecture provide programmable power management to tailor systems for per- formance and greater energy efficiency. The table below lists the supported PowerChoice modes. The further you go down in the table, the more power savings you get.

  • Page 21: Environmental Specifications

    Environmental specifications 3.9.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 60°C (140°F) within the operating ambient conditions. Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters).

  • Page 22: Vibration

    3.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. 3.9.6.1 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

  • Page 23: Acoustics

    3.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All mea- surements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note.

  • Page 24: Reliability

    Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024. Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives.

  • Page 25: Fcc Verification

    As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules.

  • Page 26: Environmental Protection

    The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chlo- ride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%.

  • Page 27: Configuring And Mounting The Drive

    Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions: Caution: •...

  • Page 28: Serial Ata Cables And Connectors

    • Install a SATA host adapter that supports autonegotiation, leave the drive jumper block set to “Normal operation” (see Figure 3, page 22 below), and connect the drive to that adapter. This option has the benefit of not limiting the drive to a 1.5 Gbits/sec transfer rate. 3.0 Gbits per second operation Limit data transfer rate to 1.5 Gbits per second...

  • Page 29: Figure 5. Mounting Dimensions-Top, Side And End View

    Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and SFF-8223, found at www.sffcommittee.org. Figure 5. Mounting dimensions—top, side and end view Constellation Serial ATA Product Manual, Rev. D...

  • Page 30: Cooling

    Cooling Cabinet cooling must be designed by the customer so that the ambient temperature immediately surrounding the drive will not exceed temperature conditions specified in Section 3.9.1, "Ambient temperature." The rack, cabinet, or drawer environment for the drive must provide heat removal from the electronics and head and disc assembly (HDA).

  • Page 31: Serial Ata (Sata) Interface

    Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment”...

  • Page 32: Serial Ata Device Plug Connector Pin Definitions

    Serial ATA device plug connector pin definitions Table 5 summarizes the signals on the Serial ATA interface and power connectors. Table 5: Serial ATA connector pin definitions Segment Function Ground Ground Signal Ground Key and spacing separate signal and power segments Ground Ground Ground...

  • Page 33: Supported Ata Commands

    Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See “S.M.A.R.T. commands” on page 34.for details and subcommands used in the S.M.A.R.T. implementation. Table 6: Supported ATA commands Command name...
  • Page 34 Command name Security Erase Unit Security Freeze Security Set Password Security Unlock Seek Set Features Set Max Address Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features regis- ter as defined to the right. Set Max Address Extended Set Multiple Mode Sleep...

  • Page 35: Identify Device Command

    5.3.1 Identify Device command The Identify Device command (command code EC power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 6 on page 27. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or vary with the state of the drive.
  • Page 36 Word Description 60–61 Total number of user-addressable LBA sectors available (see Section 3.2 for related information) *Note: The maximum value allowed in this field is: 0FFFFFFFh (268,435,455 sectors, 137 Gbytes). Drives with capacities over 137 Gbytes will have 0FFFFFFFh in this field and the actual number of user-addressable LBAs specified in words 100-103.
  • Page 37 NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. 112–127 ATA-reserved Security status 129–159 Seagate-reserved 160–254 ATA-reserved Integrity word Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
  • Page 38 Word 88 Ultra DMA mode 0 is supported. Ultra DMA mode 1 is supported. Ultra DMA mode 2 is supported. Ultra DMA mode 3 is supported. Ultra DMA mode 4 is supported. Ultra DMA mode 5 is supported. Ultra DMA mode 6 is supported. Ultra DMA mode 0 is currently active.

  • Page 39: Set Features Command

    5.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled.

  • Page 40: S.m.a.r.t. Commands

    SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4 nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T.
  • Page 41 Index ACA 19 acceleration 16 acoustics 17 Agency certification 18 altitude 15 Ambient temperature 15 ambient temperature 9 Annualized Failure Rate (AFR) 18 areal density 3 ATA commands 27 Australia/New Zealand Standard AS/NZS3548 1995 Australian Communication Authority (ACA) 19 Australian C-Tick 19 Average latency 9 Average seek time 9 BPI 8...
  • Page 42 Information Technology Equipment (ITE) 18 Initialize Device Parameters 27 Input noise ripple 13 input voltage 10 interface 8 internal data-transfer rate OD 8 is 9 ISO document 7779 17 ITE 18 Korea Ministry of Information and Communication (MIC) 19 Korean RRL 19 latency 9 LBA mode 8 logical geometry 8...
  • Page 43 Security Erase Unit 28 Security Freeze 28 Security Set Password 28 Security Unlock 28 Seek 28 Seek time 9 Serial ATA (SATA) interface 25 serial ATA ports 4 Set Features 28 Set Max Address 28 Set Max Address Extended 28 Set Multiple Mode 28 Shock 15 single-track seeks 9...
  • Page 44 Constellation Serial ATA Product Manual, Rev. D...
  • Page 46 Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100538694, Rev. D...

This manual is also suitable for:

Constellation st9500530nsEnterprise capacity 2.5 hdd constellationSt91000640nsSt91000640ssSt91000641nsSt91000641ss ... Show all

Table of Contents