Specifications - Siemens Milltronics MILLFLO Instruction Manual

Specifications

Nominal Sizes
• 100 mm (4"), 150 mm (6"), 200 mm (8"), 250 mm (10"), 300 mm (12")
Flow Rate
• 1 t/h to 230 t/h (1 STPH to 250 STPH) dependent upon range (see page 3) and product
bulk density
Product
• fine powder to 13 mm (1/2 inch) (see page 3)
Operating Temperature
• -40 to 65 °C (-40 to 150 °F)
Repeatability
• " 0.2%
Accuracy
• " 1% of full scale
Construction
• assembly:
• all welded housing and flowguide
• material:
• mild steel, painted
• optional: 304 (1.4301) or 316 (1.4404) stainless steel
• gasketing:
• silicone rubber
• sensing plate:
• 304 (1.4301) stainless steel
• optional:
Load Cell
• stainless steel parallelogram
• temperature:
• -40 to 85 °C (-40 to 185 °F) maximum range
• 0 to 65 °C (32 to 150 °F) internally compensated
• output:
• 2 mV / V excitation at rated load cell capacity
Approvals
• CE
Weight
• see page 3
Page 2
• 316 (1.4404) stainless steel
• wear resistant coatings
• low friction coating
Milltronics Millflo – INSTRUCTION MANUAL 7ML19985CS01