Schumacher Electric SE-1 User Manual page 13


1.5-Amp Charger and Maintainer
 Fully Automatic – once battery is charged, unit
switches from Full Charge to Float-Mode Monitoring

Microprocessor Controlled

Automatic Voltage Detection

Automatic Temperature Compensation

Thermal Runaway Protection
 Safety Start – charger will not supply current to
battery until it is properly connected to a battery.
 LEDs – indicate Charging, Charged and Power

Quick-Disconnect Harness

Utilize ring connector and only hook harness up
once

No need to remove battery again to charge

Both the 50-Amp clamp & ring connectors snap
into place in seconds

Reverse-Hookup Protection
Speed Charge Maintainer
Model SEM-1562A