Do you have a question about the 1001 NEB and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Seim Nova 1001 NEB
Page 1
The 1001 NEB ultrasound nebulizer is approved exclusively for the use as described in these user and maintenance manual. Siem nova can only warranty the safe functioning of the equipment when the 1001 NEB is used with the Siem nova accessories.
Page 2
Only use the 1001 NEB on the person for whom it was ordered and only for its intended use. The equipment must be used by instructed and qualified operators.
Page 3
(Please ask your supplier in case of missing parts or for additional accessories) The package contains: quantity description code Rif. Equipment 1001 NEB (basic unit) 14010 Cylinder Humidification Chamber 14125 Arm for tube and humidification and physiological solution or drug solutions 14029...
Page 4
(the green light will be on), while for a timed operation of 0 to 2 hours, turn the timer knob to the right and place the arrow on the time required. CAUTIONS The 1001 NEB device is to be set up in such a way, that a separation from the mains supply can be easy.
Page 5
4 OPERATING INSTRUCTIONS CAUTIONS: The 1001 NEB device is to be set up in such a way, that a separation from the mains supply can be easy. 4.1 Connect 1001 NEB to mains power Check the 1001 NEB before use following the instruction in chapter 4 "Preparation for use”. Check always if the power supply voltage is suitable equipment voltage.
Page 6
USER and MAINTENANCE MANUAL Manufacturer: Siem Nova S.r.l. Legal and operational offices 20087 ROZZANO (Milano) MADE IN ITALY ULTRASONIC NEBULIZER 14010 1001 NEB Product: Code: Model: Turn the power regulator knob to the desired position (for required nebulization) Turn the air flow regulator to the desired position (for required air flow rate) 4.3 Placing out of operation after use...
Page 7
The 1001 NEB ultrasound nebulizer requires few maintenance operations if used following the indication of this manual. If a 1001 NEB ultrasound nebulizer within the warranty period due to a manufacturing defect, it will be replaced. 7.1 DAILY CHECK UP User has to do it each time after using the device: Empty the cylinder of liquid using suitable tool.
Page 8
–25 °C to +70 °C (–13 °F to +158 °F). 8.2 Operating temperature The 1001 NEB nebulizer and accessories must be operated within a temperature range of +5 °C and +45 °C (+41 °F and +104 °F). Do not operate the products in extreme cold or heat.
Page 9
USER and MAINTENANCE MANUAL Manufacturer: Siem Nova S.r.l. Legal and operational offices 20087 ROZZANO (Milano) MADE IN ITALY ULTRASONIC NEBULIZER 14010 1001 NEB Product: Code: Model: 9 INFO LEAFLET Fuses Piezoelectric transducer Electric outlet for anti-noise fuses 10 ELECTRICAL DIAGRAM...
Page 10
ELECTROMAGNETIC EMISSIONS The 1001 NEB ultrasound nebulizer is intended for use in the electromagnetic environment specified below. The customer or the user of the 1001 NEB should ensure that it is used in such conditions: Emissions test Compliance Electromagnetic environment RF emissions CISPR 11.
Page 11
/ flicker EN 61000-3-3 ELECTROMAGNETIC IMMUNITY The 1001 NEB ultrasound nebulizer is intended for use in the electromagnetic environment specified below. The customer or the user of the 1001 NEB should ensure that it is used in such conditions: IMMUNITY test Test level...
Page 12
The 1001 NEB ultrasound nebulizer is intended for use in an electromagnetic environment in which radiated RF disturbances under control. The customer or the 1001 NEB operator of the device can help prevent electromagnetic interference by maintaining a minimum distance between mobile and portable RF communication equipment (transmitters) and the 1001 NEB device as recommended below, in relation to the maximum output power the communications equipment.
Need help?
Do you have a question about the 1001 NEB and is the answer not in the manual?
Questions and answers