Installing Batteries - Walgreens WGNBPA-730 User Manual

Automatic arm blood pressure monitor
Table of Contents

Advertisement

Available languages

Available languages

INSTALLING BATTERIES

1. P ress down on latch and lift the battery cover to open
2. I nstall or replace 4 "AAA " sized batteries in the battery
3. Close the battery cover by pushing in the top end of the
Replace the batteries if:
• T he weak battery symbol appears on the display.
• N othing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only 1.5V
"AAA " alkaline batteries. Remove batteries when unit is not in
use for extended periods of time. Date and time will need to
be reset if batteries are removed or replaced. Clean contacts
on battery and in battery compartment with a soft dry cloth
each time you install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
IB-WGNBPA-730_A--01.indd 11
the battery compartment.
compartment according to the indications inside the
compartment.
battery door.
Battery
Cover
11
2013/8/6 下午5:03

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents