INSTRUCTION MANUAL 2.4 GHz Expansion Cordless Handset with Charging Cradle IMPORTANT Charge the handset battery pack a full 15-20 hours before using your cordless handset for the first time. SANYO Canada Inc. www.sanyocanada.com CLT-OHE40...
AC power to connect the handset charging cradle. IMPORTANT The CLT-OHE40 expansion handset will not operate unless it has been registered to your main base. This manual describes how to set up and connect your new handset; for instructions on operating your new handset, refer to the owner's manual supplied with your main base.
UU438DH_ENG.fm Page 3 Monday, June 13, 2005 7:00 PM Step 1: Connect the Charger Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.
UU438DH_ENG.fm Page 4 Monday, June 13, 2005 7:00 PM Step 2: Register the Handset YOU NEED TO REGISTER THE CLT-OHE40 TO A MAIN BASE BEFORE USE! Be sure the handset battery is fully charged. With the main base in standby mode (i.e., not being used), place the handset in the main base to begin registration.
UU438DH_ENG.fm Page 5 Monday, June 13, 2005 7:00 PM Using Your Expansion Handset Now that your new handset is registered, it can perform all the same functions as the handsets originally included with your phone. With your new handset, you can •...
CLT-E40/42 series base. The CLT-OHE40 has many new features. You can record a ringer from any audio source, select animation on the display, and set alarms to remind you of important events.
UU438DH_ENG.fm Page 7 Monday, June 13, 2005 7:00 PM 5)To end recording, press the STOP soft key. The phone will play the recorded ringer. 6)Press the center of the joystick or the SAVE soft key to store the ringer tone. 7)Enter the title of this ringer.
Caution: Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. – . To delete all reminders, select Ne w E n tr y .
Notes: • Use only the SANYO battery (BT-0001) supplied with your phone. • Don't place the charger in direct sunlight or subject it to high temperatures. The battery may not charge properly.
The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from SANYO Canada Inc. or an authorized Sanyo Service Depot. You also are responsible for the cost of any MAINTENANCE necessary in respect of the product.
UU438DH_ENG.fm Page 12 Monday, June 13, 2005 7:00 PM SOS HELP LINE At Sanyo, fulfilling the needs of our customers is a priority. That's why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of Sanyo telephone products.