Safety Instructions - Silvercrest SDM 1500 C2 Operating Instructions Manual

Safety instructions

RISK OF ELECTRIC SHOCK!
Connect the appliance only to mains power sockets supplying
►
a mains power voltage of 220 - 240 V ~ , 50/60 Hz.
In the event of operating malfunctions, and before cleaning
►
the appliance, disconnect the plug from the mains power
socket.
To disconnect the power cable, always pull the plug from the
►
socket, do not pull the power cable itself.
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over.
To avoid risks, arrange for defective plugs and/or power
►
cables to be replaced at once by qualifi ed technicians or
our Customer Service Department.
Make sure that the power cable does not become wet or
►
damp during use. Route the cable in such a way that it
cannot be crushed or damaged.
To prevent risks, stop using the appliance immediately if it
►
is damaged.
Disconnect the appliance from the mains power socket before
►
fi lling it with water, changing accessories or cleaning it.
Use the appliance only in dry indoor areas, not
outdoors.
Never submerse the appliance in water or other liquids!
►
Never aim the steam jet directly at electrical appliances or
►
equipment which contains electrical components, such as
the interior of ovens.
SDM 1500 C2
│
41 ■
GB