Haier 1UH071N1ERG Installation Manual page 3

WARNING
I
f the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
T
his appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
C
hildren should be supervised to ensure that they do not play with the appliance.
T
his appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
T
he appliances are not intended to be operated by means of an external timer or separate remote-control system.
K
eep the appliance and its cord out of reach of children less than 8 years.
T
his appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial
use by lay persons.
D
isconnect the appliance from its power source during maintenance service and when replacing parts.
1) Means for disconnection, such as circuit breaker, which can provide full disconnection in all poles, must be incorporated
in the fixed wiring in accordance with the wiring rules.
It is necessary to allow disconnection of the appliance from the supply after installation. The disconnection may be achieved
by incorporating a switch in the fixed wiring in accordance with the wiring rules.
The method of connection of the appliance to the electrical supply and interconnection of separate components, and the
wiring diagram with a clear indication of the connections and wiring to external control devices and supply cord are detailed
in below parts.
2) The appliance shall be installed in accordance with national wiring regulations. Wiring must be done by a qualified
electrician. All the wiring must comply with the local electrical codes.
3) The cord of the H05RN-F type or the electrically equivalent type must be used for power connection and interconnection
between outdoor unit and indoor unit. The size of the cord is detailed in below parts.
4) Details of type and rating of fuses, or rating of circuit breakers / ELB is detailed in below parts.
5) The information of dimensions of the space necessary for correct installation of the appliance including the minimum
permissible distances to adjacent structures is detailed in below parts.