Transporting Your Product - Epson XP-7100 User Manual

6. Moisten a cotton swab with the water and detergent mixture and squeeze out any excess moisture,
then lightly wipe the ink off the translucent film.
Caution: Do not press too hard on the film or you may dislocate the anchor springs and damage
your product.
7. Use a new, dry cotton swab to dry the translucent film.
8. Repeat steps 6 and 7 as necessary to clean all ink smears.
9. When the translucent film is dry and free of any fibers, close the scanner unit.
10. Reconnect any disconnected cables, plug in the power cord, and turn on the product.
Parent topic:
Related tasks
Aligning the Print Head Using the Product Control Panel
Cleaning the Paper Guide

Transporting Your Product

If you need to store your product or transport it a long distance, prepare it for transportation as described
here.
Cleaning and Transporting Your Product
262