Table of Contents
Advertisement
Installation
Configure the network with the computer
This example explains how to set the following configuration.
IP Address
Subnet Mask
Default Gateway : 172.21.95.1
DNS
The default network configuration is set as follows.
IP Address
Subnet Mask
Default Gateway
DNS
Make sure that the monitor is connected to the network and then connect the AC cord to
the outlet.
1
Temporarily*
set up your computer network configuration to the same IP network num-
1
ber as the PJ-Net Organizer. For example, change your computer network configura-
tion as follows and restart the computer.
IP Address
Subnet Mask
Default Gateway
DNS
The network configuration of computer differs depending on each network environment or
your computer. For further information, please see the chapter "Configure the network of
computer" on page 17.
*1 Change your computerʼs network configuration temporarily. After completing the set up for the mon-
itor, you must set up again to the original network configuration for your computer. It is recommend-
ed to make a note of those network settings.
14
: 172.21.95.224
: 255.255.255.0
: 172.21.1.53
: 192.168.0.2
: 255.255.255.0
: 0.0.0.0
: 0.0.0.0
: 192.168.0.5
: 255.255.255.0
: (blank)
: (blank)
Advertisement
Table of Contents
