Audio cable x 1
CD-ROM x 1
If the line of rectangles in the battery indicator (
recording, stop the recording immediately and replace the batteries.
Do not disconnect the AC adaptor or remove the batteries while operating
Before erasing, make sure that the battery indicator is full.
The apparatus should not be exposed to dripping or splashing.
Do not insert pins, etc., inside the unit.
Do not drop the unit or subject it to strong shocks.
Do not use where there are extremes of temperature (below 5 C (40 F)
or exceeding 35 C (95 F)).
WHAT TO DO IF...
If the operation of the unit or display is not nor-
1. Open the battery compartment lid.
2. Remove the batteries. Wait 2 minutes, then
reinstall the batteries.
3. Press the reset switch (back of the unit) using a small ball-point pen,
etc. (Fig. 1)
4. Resume operation.
Because its products are subject to continuous improvement, SANYO re-
serves the rights to modify product designs and specifications without
notice and without incurring any obligation.
Parallel port adaptor x 1
Case x 1
) disappear during