Power Connection; Initial Channel Search; On-Screen Menu Operation Manual Channel Search; Channel Scan Memory - Sanyo DP37649 Owner's Manual

37" hdtv lcd
Hide thumbs Also See for DP37649:
Table of Contents

Advertisement

Available languages

Available languages

GETTING STARTED— INITIAL CHANNEL SEARCH

POWER CONNECTION

Plug in AC power cord (120V
AC, 60 Hz).
Press the POWER key.
(Follow the on-screen
instructions.)
To 120V AC outlet.

INITIAL CHANNEL SEARCH

Press the CHANNEL L (Up) key to search for
signals connected to the Antenna terminal.
Channel Search will check for Antenna and
Cable signals. If Antenna signals are detected,
the HDTV searches for both analog and digital
off-air channels. If Cable signals are detected, the
HDTV will search for analog Cable channels.
If no Antenna signals are detected, the HDTV
will begin an AV search.
If neither of these searches detected a valid
signal, the HDTV will tune to input Video1.
AV SEARCH
NOTE: Be sure all the external video devices you
connected to the HDTV inputs are powered
ON before you begin an AV Search.
By pressing the CHANNEL M (Down) key on the
Initial Display screen, the HDTV will search for
signals from devices you connected to the AV
input jacks.
AV Search will begin checking the AV inputs for
valid signals, beginning with input Video1.
When a valid signal is detected, the search
process ends and the HDTV tunes to that input
source.
10
Need help?
www.sanyoctv.com
(FIRST POWER ON)
INITIAL DISPLAY SCREEN
CHANNEL SEARCH SCREEN
AV SIGNAL SEARCH SCREEN
1-800-877-5032
ON-SCREEN MENU OPERATION
MANUAL CHANNEL SEARCH
Press MENU to display the On Screen menu and
use the CURSOR LM keys to select Manual
Channel Search. Press ENTER.
Select one of the three available categories:
Cable – Searches for analog and unscrambled
(ClearQAM) digital cable channels.
Air (Antenna) – Searches for analog and digital
off-air channels.
Digital Add-On – Searches for digital off-air chan-
nels adding newly found digital channels to the
channel map database.
NOTE: Digital Add-On option is not available when the
current mode is Cable.

CHANNEL SCAN MEMORY

Channel Scan Memory is a database of active
channels you can scan using the CHANNEL LM
keys. Customize it by deleting or adding channels.
Press MENU to display the On Screen menu and
use the CURSOR LM keys to select Channel Scan
Memory. Press ENTER.
Use the CHANNEL LM or NUMBER keys to select
the channel you wish to Add or Delete.
NOTE: Use the 1– – key to select cable channels
above 99.
Press ENTER to Add or Delete the channel in the
Channel Scan Memory database.
NOTE: You can tune to a deleted channel by using the
number keys on your remote.
Need help?
MANUAL CHANNEL SEARCH SCREEN
IMPORTANT FACT: This HDTV maintains only one data-
base of digital channels. Therefore, when you search for
cable channels, the database of antenna digital channels
will be deleted. You will only be able to receive those
ClearQAM channels your cable company provides.
CHANNEL SCAN MEMORY SCREEN
NOTE: For information on local digital channels,
visit www.antennaweb.org
www.sanyoctv.com
1-800-877-5032
11

Advertisement

Chapters

Table of Contents
loading

Table of Contents