SHIFTER
NOTE: ______________________ _
Shifter maintenance should be performed with
clutch assembly removed.
Removal
1.
Pull out the change lever assembly.
2.
Remove the flange bolt, stopper lever and
spring.
1.
Change lever assembly
2.
Stopper lever
Inspection
1. Inspect shift return spring
.
A broken or
worn spring will impair the return action
of the shifting mechanism.
2.
Inspect change lever assembly for ben-
ding of shaft, worn or bent spline, and
broken or worn shift arm spring. A bent
shaft will cause hard shifting.
3.
Inspect the segment for wear or damage,
replace as required.
Installation
1. Engage the shift return spring with its
3-25