CRANKCASE COVER
Removal
1. Drain off the transmission oil and coolant.
Loosen the hose clamp and disconnect
the coolant hoses.
2.
Remove the rear brake and footrest
assembly.
3.
Remove the kickstart lever and cover.
4.
Remove the right hand crankcase cover.
3-17
Assembly
For reassembly, reverse the procedure for
disassembly while taking the following care:
1.
Install the dowels, new gasket, and
crankcase cover.
1. Dowel
2.
Tighten the following components.
Crankcase cover:
12 Nm (1.2 m-kg, 9 ft-Ib)
Footrest bracket:
55
Nm
(5.5
m-kg,
40
ft-ib)