Download  Print this page

Advertisement

Power supply

For a list of available power supplies, see
The power supply is secured to the rear of the chassis with three screws. Three cables connect the power
supply to the system board.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Disconnect the power and data cables from the rear of the drives in the drive cage.
5.
Remove the drive cage
6.
Disconnect the power supply cables from the following system board connectors:
– PWRCPU
– PWR
– PWRCMD
58
Chapter 4 Removal and replacement procedures
Computer major components on page
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page
19).
(Drive cage on page
32)
18).
5.
17).

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: