Identification of Controls
Main Unit
Remote Sensor
Power Indicator
1. SOURCE
To select the input signal source.
2. MENU
Press this button to access the MENU main page.
3. CH+/-
Press these two buttons to directly change the TV channel;
In OSD MENU, press these buttons to choose the OSD items.
4. VOL+/-
Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
In OSD MENU, press these buttons to adjust the value or setting of each item.
5. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to
STANDBY.
Note:
Functions of VOL+/-, CH+/-, MENU, SOURCE and POWER
operation manual provides a description based on operating functions with the remote control.
7
Power On/ Standby
CH+
CH-
VOL+
VOL-
MENU
SOURCE
are also provided to the remote control. This
Channel Up
Channel Down
Volume Up
Volume Down
MENU
Select Input Signal