Hitachi HIDIC MICRO-EH Applications Manual page 275

No. Name
WRF06B Pulse and PWM
output auto
correction setting
WRF06C Potentiometer CH1
WRF06D Potentiometer CH2
WRF06E
Analog input type
selection
Counting mode of
WRF06F
2-phase counter
WRF070
I/O operation mode
WRF071
I/O detailed function
settings
WRF072 Output frequency,
to F075
On-preset value
WRF076 On-duty value,
to F079
Off-preset value
WRF07A Pre-load value,
to F07D
Pulse output value
WRF07E Input edge
WRF07F Input filtering time
WRF080 Undefined
to F19F
*: See Chapter 8 for more details.
Stored data
01: For EH-***DTP The output waveforms of the pulses and
02: For EH-***DT PWM are automatically corrected by
03: For EH-***DRP setting the value corresponding to the
04: For EH-***DRT CPU model.
Sampling number: 0 to 40.
15 14 13
a b
Selects whether the analog input is voltage or current.
a: Analog 1 selection 0=Voltage
b: Analog 2 selection 0=Voltage
00: Mode 0 01: Mode 1
02: Mode 2 03: Mode 3
H00: Mode 0
H01: Mode 1
H02: Mode 2
H03: Mode 3
H10: Mode 10
I/O assignment for counter, PWM and pulse train output
Frequency setting value, on-preset setting value
On-duty setting value, off-preset setting value
Counter pre-load value or pulse output value
Counter input edge setting value
Filter time ×0.5 ms, up to 40 (=20ms)
Do not use.
Chapter 12 Error Code List and Special Internal Outputs
Description
Not used
1=Current
1=Current
12-12
Setting Resetting
condition condition
0
Cleared by
Set by user
user