Basic Tv Connections; Optional, Preferred Tv Connections - Sanyo DVC-2600 Instruction Manual

Dvd player + video cassette recorder
Hide thumbs Also See for DVC-2600:
Table of Contents

Advertisement

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
Note
If you use this connection, tune the TV to the
DVD+VCR's RF output channel (CH 3 or 4).
How to set the DVD+VCR's RF output channel
1. When the DVD+VCR is turned off, press and hold
CHANNEL (v/V) on the front panel for about five
seconds.
It will turn itself on and "RF 03" or "RF 04" appears in the
display window.
2. Press CHANNEL (v/V) on the front panel or CH/TRK
(v/V) on the remote control to change the RF output
channel (CH 03 or CH 04).
3. Turn off and on the DVD+VCR.
Audio/Video connection
Connect the DVD/VCR VIDEO OUT jack on the
1 1
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).
Connect the Left and Right DVD/VCR AUDIO OUT
2 2
jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.
Note
If you use this connection, set the TV's source selector
to VIDEO.
Rear of TV
ANTENNA
INPUT
R
Rear of DVD+VCR
12
VIDEO
AUDIO INPUT
INPUT
R
L
A1
V

Optional, Preferred TV Connections

Notes
You can ONLY watch and listen to DVD playback
through the connections shown below.
When using the COMPONENT VIDEO OUT jacks,
set the video output select switch to COMPO-
NENT. When using the S-VIDEO OUT jack, set the
video output select switch to S-VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+VCR
1 1
to the S-Video in jack on the TV using the optional
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD+VCR to the audio left/right in jacks on the
TV using the supplied audio cables (A2).
Component Video (Color Stream
Connect the COMPONENT VIDEO OUT jacks on
1 1
the DVD+VCR to the corresponding in jacks on the
TV using an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD+VCR to the audio left/right in jacks on the
TV (A2) using the supplied audio cables.
Rear of TV
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
Pr
Pb
S
C
Rear of DVD+VCR
®
) connection
AUDIO INPUT
Y
R
L
A2

Advertisement

Table of Contents
loading

Table of Contents