Figure 23. Installing the storage drive bracket
6. Connect the signal cable and the power cable to the new storage drive.
7. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 45.
Replacing the card reader
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Replacing the front bezel" on page 14.
3. Remove the optical drive. See "Replacing the optical drive" on page 15.
4. Remove the storage drive bracket. See "Replacing the storage drive" on page 17.
5. Disconnect the card reader cable from the system board.
6. Replace the card reader.
Figure 24. Removing the card reader bracket
.
Chapter 4
Replacing hardware
21