Download  Print this page

Verifying The Local Settings; To Check Or Set The Institution Name - Philips HD3 Service Manual

Hide thumbs

Advertisement

Table of Contents
4535 612 34161
HD3 Service Manual
CSIP Level 1
Verifying the
Local Settings
for aproximately 3 seconds, the power On/Off button on the control panel to power on the sys-
tem.
Basic initial configuration is addressed in the following sections. For detailed user information
and instructions for configuring and operating the system, refer to the HD3 Getting Started man-
ual.

➤ To check or set the institution name

1. Press Setup (F10).
The Setup window opens
2. In the Setup window, click Local.
Type in, verify, or change the name of the institution.
At this (or a later time) you can also specify whether or not the Caps Lock setting is to be on
or off at startup and whether or not to have the system automatically create a medical
record number for new patients. See
Installation: Powering On and Configuring the System
(Figure
5-1).
"Configuring Other System Settings" on page
Page 73
87.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: