Tv Adjustment And Setup; How To Operate The On-Screen Menu; Setting The Clock, Audio Mode - Sanyo DS27930, DS32424 Owner's Manual

TV Adjustment and Setup

QuickTips
The menu will
■
display on the
screen for approxi-
mately 20 seconds.
Press MENU again
to redisplay.
Use the CHANNEL
■
▲ / ▼ keys and the
VOLUME – /+ keys
to navigate through
the menus and to
make selections
from the menus.
To see the time
■
of day after setting
the clock, press the
DISPLAY key.
Extended Data
■
Service (XDS)
signal may not be
transmitted by all
broadcasters.
Under weak stereo
■
signal conditions,
you may receive
better quality sound
in the "Mono"
position.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
12
On-Sreen Menu / Setting the Clock / Audio Mode
The on-screen menu provides the viewer with easy access to adjustments and settings. Just use
the keys on the remote control and follow the on-screen instructions.

How to operate the On-screen Menu

1. Press MENU key.
2. Use the ▲ /▼ keys to highlight the desired
feature.
3. Use the – /+ keys to choose desired
option. ( indicates selected item.)
➧
4. Press the MENU key to exit.
Items with submenus requires additional
steps.
Setting the Clock
To use the Auto Clock feature, a local PBS
station that is broadcasting an XDS signal
must be received. The Auto Clock searches
for the transmitted signal and automatically
sets the clock. (This may take several seconds.)
To set the clock automatically
1. Press MENU key.
2. Use the + key to activate Auto setting.
Notes:
The clock will be cleared after a power interruption.
When power is restored, the TV will display the Auto
Clock setup menu on the screen automatically.
Cable Box and Satellite users must set the clock manually.
To set the clock manually
1. Press the MENU key.
2. Press the ▲ or ▼ key to select Clock.
3. Press the MENU key to choose Manual.
4. Use the – key to set the hour and the + key to set the minutes.
Setting Audio Mode
Select desired sound setting, Stereo, Mono, or SAP (secondary audio program).
Note: Stereo and SAP must be part of the broadcast signal.
1. Choose Stereo, Mono, or SAP from the Audio
options.
Note: The TV will automatically reset to stereo
if unplugged or a power failure occurs.
▲▼ keys
– + keys
➧Manual Auto
Clock
➧Stereo
Audio
➧Sports Movie
Picture /Sound
News
➧OFF
Initial Channel
➧Cable
Antenna
➧NO
CH. Search
CH. Scan Memory C 34
➧4:3
Aspect Ratio
Scan Velocity OFF
➧ON
TV Speakers
➧Fixed
Audio Output
➧English Francais
Menu Language
Press MENU key to exit
▲▼ keys
Clock Clock Manual
Auto Clock Setting
Press MENU key to cancel
▲▼ keys
➧Manual
Clock Clock Manual
▲▼ keys
Clock
➧Stereo
Audio Audio Stereo
Mono SAP
Manual
ON C---
VHF/UHF
Start
Added
16:9
Low
➧High
OFF
Variable
Espanol
– + keys
➧Auto
Auto
– + keys
Auto
10:30 10:30
– + keys
Mono SAP