Using The Remote Control - Sanyo AVM2445 Owner's Manual

Sanyo color tv owner's manual

Hide thumbs

Table of Contents

INSTALL BATTERIES AS SHOWN

(2 AAA, not included)

Notes:

–

Do not mix old batteries with new ones or mix differ-

ent types of batteries together.

–

Remove the batteries if the remote control will not

be used for a month or more. Weak batteries may

leak and cause damage.

(Normal battery life is roughly six months.)

REMOTE CONTROL KEYS

Power Key—Press to turn TV ON or OFF.

Input Key—Press to select the program source to watch:

TV signal or signal from DVD Player or other equipment

you have connected to the A / V jacks.

Number Keys—Press two keys to select a channel.

Example: Press 0 then 6 to select channel 6. For cable

channels 100 through 125, press and hold the 1 key until

C1– – appears. Then press the other two numbers.

Caption Key—(See page 12.)

Menu Key—Use this key with the LM and – + keys to

navigate and adjust features of the on-screen menu system.

(See pages 10 ~ 12.)

‘

Channel Scanning (CH LM) and Volume (VOL – +)

Keys—Press to scan through the channels in memory and

to adjust the volume.

I Be sure batteries are installed correctly.

I Point the remote control toward the TV. Objects between the

remote control may cause misoperation of the remote control

function.

I Cannot select channel with number keys. Press "0" in front

of numbers 1~9. Example: Channel 05.

I Adjusting the volume level: Flashing Right arrow

indicates volume is increasing and flashing Left arrow indi-

cates volume is decreasing.