About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. This manual gives basic connections and operating instructions for 4 models (VM-6609, 6612, 6614 and 6619). VM-6609...
INFORMATION TO USER WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
IMPORTANT SAFEGUARDS READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning.
PARTS NAMES Front Panel Monitor Selector Switch (VIDEO A/B) Turn this Monitor selector switch A position for a signal fed through the rear panel VIDEO A connectors. Then, turn this Monitor selector switch B position for a signal fed through the rear panel VIDEO B connectors. Contrast Control (»...
PARTS NAMES Rear Panel VM-6609 VM-6612 AC input socket (AC INPUT) Connect the AC power cord (supplied) securely to this socket and to a wall outlet. Video input terminals (VIDEO IN) These terminals are used to input a video signal source to this monitor.
CONNECTION Before connecting your system, make sure that all units are turned off. The picture signal source can be connected to either the A or B terminal at the rear of the monitor. The monitor selector switch at the front of the monitor can be used to select the input terminal used. Single Connection To Video B INPUT terminal...
BASIC OPERATION Press the POWER switch to turn on the power. The power is turned on (the POWER indicator is lit). OFF: The power is turned off (the POWER indicator is off). Select the picture input. Use the monitor selector switch at the front of the monitor to select the picture being input to either the A or B input terminal.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a SANYO-authorized dealer or service center for assistance. Problems No power supply. Is the power plug loosened or disconnected?
SPECIFICATIONS VM-6609 System Picture tube 9" measured diagonally, 90˚ deflection angle Resolution More than 800 TV lines (center) Scanning frequency Input terminals VIDEO A VIDEO B Output terminals VIDEO A VIDEO B Sub Adjusting control Sub bright volume Vertical size volume...
Page 11
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.