Must be at least 305 mm (12") from ground or any object
that may obstruct exhaust (such as flowers, rocks, bushes,
45° elbows provide better airflow than 90° elbows.
Use clamps to seal all joints.
Exhaust vent must not be connected or secured with screws
or other fastening devices that extend into interior of duct
and catch lint. Do not use duct tape.
See "Venting Kits" for more information.
Plan Vent System
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
F. Rigid metal or flexible metal vent
G. Vent length necessary to connect elbows
H. Exhaust outlet
D. Exhaust hood
I. Optional side exhaust outlet
Standard rear offset exhaust installation