Sanyo 42LM4RTC User Manual page 11

7. The moving indicator under
Nominally the Coarse Sensitivity
about a third of the way along in response to a light touch.
8. The Press Threshold
button press. The driver recognises a touch when the
position of the Press Threshold
required for mouse movement.
9. To make certain that the touch is sensitive enough all over the display area, move a finger
around the touchscreen and make certain that the
the Press Threshold
Finger Pressure shows the strength of touchscreens signal.
slider is adjusted so the
slider is used to adjust the sensitivity of the touch to simulate a mouse
slider. As default this is the same sensitivity level as
slider position.
11
Finger Pressure
Finger Pressure indicator exceeds the
Finger Pressure
indicator always exceeds
indicator moves