INSTRUCTION MANUAL CD Portable Radio (AU)MR601P63000010 MCD-XP630 MCD-XP631 LINE IN PHONES SANYO Electric Co., Ltd. Printed in China...
CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROP- ERLY QUALIFIED PERSONNEL. Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
POWER SUPPLY AC Power Connect one end of the mains lead to the AC input socket (back of the unit) and the other end to an AC outlet. Note: The installed batteries are automatically disconnected when the mains lead is connected to the unit.
6. Press the n button to end disc play back. When the last track has been played, the player stops automatically. 7. To turn the CD player off, set the function switch to OFF. Note: Do not open the CD compartment during CD play. Always press the n button and wait for the disc to stop rotating before opening the CD compartment.
Search (forward/reverse) If the e or f button is pressed during play, the player will search at high speed in the forward or reverse direction while the button is being pressed. When the button is released, normal play will continue. Repeat/Random play Press the REPEAT/RANDOM button repeatedly to select the various play mode.
FM: Pull out the telescopic aerial and adjust its position. AM: Rotate the unit. MAINTENANCE Cleaning the CD player lens The lens should never be touched. If dust is on the lens, blow it off using a camera lens blower. (Consult your dealer.) Cleaning the unit Clean the outside of the unit with a clean soft cloth, moistened with lukewarm water.