Setting Manual White Balance - Sanyo VPC-HD100 Instruction Manual

Setting Manual White Balance

You can manually set and store the white balance when the menu options do not offer
a good match.
1. In video/capture mode, press the MENU
button.
2. Select [W.Balance] with the
(MENU) buttons, and press the
3. Select [Manual WB] with the
(MENU) buttons, and press the
4. Select [New WB], and press the
To use the previously set white balance
data, select [Use Data], and press the
button.
5. Point the video camera at a white paper or
white slate, and press the
When the manual white balance is stored,
[COMPLETE] will be displayed and the
video camera returns to recording mode.
(MODE) /
button.
(MODE) /
button.
button.
button.
Manual WB
Use Data
New WB
: Exit
New WB New WB New WB New WB New WB
: : Exit Exit Exit
: OK
: : OK OK OK
EN-25