Installation Instructions; Unpack Range; Backguard Assembly - Whirlpool WFG500M4H Installation Instructions Manual

Unpack Range

WARNING
Excessive Weight Hazard
Use two or more people to move and install range.
Failure to do so can result in back or other injury.
1. Remove shipping materials, tape and film from range.
2. Remove oven racks and parts package from inside oven and
on top of range.
3. Do not remove the shipping base at this time.
A
A. Shipping base
Remove the storage drawer. See the "Storage Drawer"
section. Use a wrench or pliers to lower front leveling legs
one-half turn.
B
A
A. Wrench or pliers
B. Front leveling leg

INSTALLATION INSTRUCTIONS

Backguard Assembly

Tools Required:
Phillips Screwdriver
1. Lower Backguard down while guiding the Backguard slots
down between the range top and the locking nuts.
2. Use the two assembly screws to attach the back corners of
the Backguard to the side panels.
A. Backguard slot
B. Assembly screw
Parts Supplied:
(2) Assembly Screws# lOA x
1/2 Phillips Pan Hd Screw
A
B
C
B
C. Locking nut
7