Figure 1 - Stress Redistribution; Figure 2 - Stress Redistribution; Figure 3 - Stress Redistribution - Geokon 4820 Instruction Manual

Hide thumbs Also See for 4820:
Table of Contents

Advertisement

2
Mean
Stress
0
As can be seen there is a stress concentration at the rigid rim but in the center of the cell the soil
stress is only slightly higher than the mean soil stress, i.e., only slightly higher than the stress
which would obtain were the cell not present.
In a stronger soil, the destressed zone around the edge of the cell is more extensive; therefore, the
degree of over registration of the mean stress is greater at the center of the cell. This is
represented schematically in Figure 2.
Mean
Stress
0
In a stiff soil the cell may be less stiff (more compressible) than the soil, in which case the cell
will under register the mean soil stress as the stresses in the soil tend to "bridge" around the cell.
This is represented schematically in Figure 3.
Mean
Stress
0
Figure 1 - Stress Redistribution, Weak Soil with Stiff Cell
Figure 2 - Stress Redistribution, Strong Soil with Stiff Cell
Figure 3 - Stress Redistribution, Stiff Soil with Weak Cell
Cell
Cell
Cell

Advertisement

Table of Contents
loading

This manual is also suitable for:

483048154800 series

Table of Contents