Check the appliance is electrically safe and gas sound when you have finished.
Checking the Parts:
Pan supports
Full capacity shelf
ArtNo.326-0013 - Full capacity shelf
(Falcon)
2 grill pans & trivets
ArtNo.331-0008 - 90SC
grill pan & trivet
Divider
ArtNo.281-0028 - Albertine divider
INSTALLATION
Wok cradle
Grill pan tray support
ArtNo.326-0004 - Cradle shelf
3 energy saving shelves
ArtNo.326-0002 - Energy saving shelf
Plinth
ArtNo.350-0008 - 90 SC plinth
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders' merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
4 mm & 3 mm Allen keys
8.
Spirit level
9.
Pencil
10. Adjustable spanner
11. Screws for fitting the stability bracket
12. 13 mm spanner or socket wrench
20