Compact Backstop - Lindsay Universal TAU-II Installation Manual

U n i v e r s a l T A U - I I

Compact Backstop

The Compact Backstop (Figure 15) is bolted together
in two halves and is usually pre-assembled.
Backstop is a stand alone design is not anchored to
the hazard being protected.
Refer to Step 1 and Step 2 for Backstop layout and
anchorage details.
Figure 15 Compact Backstop (Parallel Systems)
Lindsay Transportation Solutions Sales and Services, Inc (888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
®
C r a s h C u s h i o n
The
T A P E R E D S Y S T E M
Pipe Panel Mounts bolt to the sides of the backstop
and provide a mounting point for the Slider and End
Panels. Refer to the system drawing for the backstop
assembly size needed.
If a 36" [910mm] Backstop is desired, attach the 36"
[910mm] Backstop Adapters (Figure 16) to the sides
of the backstops and bolt the Pipe Panel Mounts to
the pivoting sections.
For additional information or questions about the
Universal TAU-II Crash Cushion, please call the
BSI Customer Service Department at (888) 800-
3691 (U.S. toll free) or (707) 374-6800.
Figure 16 Compact Backstop (Tapered Systems)
Page 31
31