Phone Setup - Cisco 8811 User Manual

New Information for Firmware Release 11.0
Revision
Added the following section for Postpone a Phone
Upgrade
Revised the following section for Do Not Disturb
Added Connect to a Pre-Configured Wi-Fi Network
New Information for Firmware Release 11.0
Table 5: Cisco IP Phone 8800 User Guide revisions for Firmware Release 11.0.
Revision
Removed references to specific font size.
Updated the following section for improved Barge
and Merge support.
Revised the following section for the improved
Problem Report Tool support.
Added new icon to the following section for Do Not
Disturb(DND).
Updated the following section for Welcome screen.

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Cisco IP Phone 8800 Series User Guide
4
Updated Section
Phone Firmware and Upgrades, on page 19
Turn On Do Not Disturb
Connect to a Pre-Configured Wi-Fi Network, on page
6
Updated Section
Change the Font Size.
Add Yourself to a Call on a Shared Line
Report All Phone Issues, on page 22
Turn On Do Not Disturb
Connect to Expressway, on page 8
Your Phone