Operations; Technical Specifications - Kärcher LB2000I Operating Instructions Manual

Operations

Technical Specifications

ITEM
Construction
Motor
Transmission
Pad speed
Electrical system:
LB2000I, LB2000IA
LB2000, UB2000F
Cable
Switches
Pad Holder
Wheels
Handle
Dimensions (L x W x H)
Pad size (See note)
NOTE: Always use a pad, which has been designed for electric ultra high speed burnishing of at least
2000 rpm.
The sound pressure level at the operator's ear was measured to be 70 dBA. This was a nearfield, broad-band
measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source
of impact noise. The instantaneous sound pressure level is below 63 Pa.
12
Heavy-duty die cast aluminum deck with heavy-duty rubber bumper,
tubular steel self adjusting handle with die cast aluminum handle
housing.
1.5 hp
Direct drive from motor shaft.
2000 rpm
230 volts, 50Hz
115 volts, 60Hz
75' [22.9 m]
Dual levers with safety lock.
Æ20" [50.8 cm] flexible disc
Four Æ5" [Æ12.7 cm], 1.25" [3.2 cm] wide, non-marking tread.
Æ1.5" [Æ3.8 cm] tubular steel, self adjusting handle consistently
maintains full contact with the floor, and easy to use thumb activated
safety lock.
32" [81.3 cm] X 23.9" [60.2 cm] X 48.4" [122.9 cm]
20" diameter x 1" thick
86402450 Operators Manual - High Speed Burnisher (2000 Series)
DIMENSION/CAPACITY