Terminal Box 1Xb1621; Figure 6-2 Terminal Box 1Xb1621 - Siemens SIMOTICS FD 1MH1 Operating Instructions & Installation Instructions

Terminal box 1XB1631 (Page 82)
Terminal box 1XB7730 (Page 83)
Terminal box 1XB7731 (Page 83)
Terminal box 1XB7740 (Page 84)
Terminal box 1XB7750 (Page 85)
6.3.1

Terminal box 1XB1621

Figure 6-2
The connecting cables are introduced into the 1XB1621 terminal box through the cable glands
with threaded holes 2 x M80 x 2 and 2 x M25 x 1.5. The cable glands are not included in the
standard scope of supply. The version with sealing insert with break-off ring is optional.
You can find additional information here:
● Bringing cables into the terminal box 1XB... with cable gland (Page 93)
● Connecting cables without cable lugs (Page 96)
● Connecting cables with cable lugs (Page 95)
See also
Bringing cables into the terminal box 1XB... with sealing insert with break-off ring (Page 92)
SIMOTICS FD 1MH1
Operating Instructions 08/2017
Terminal box 1XB1621
Electrical connection
6.3 Terminal box
81