Remote Control Unit Installation Position; Mounting On A Wall - Sanyo KS1872 Installation Instructions Manual

Inverter split system air conditioner
Table of Contents

Advertisement

7. Remote Control Unit Installation Position

The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do
not install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other place where it is covered
More than 26' (8 m) away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic
interference
Where there is an obstacle between the remote con-
trol unit and the air conditioner (since a check signal
is sent from the remote control unit every 5 minutes)

7-1. Mounting on a Wall

Before mounting the remote control unit, press the
ON/OFF operation button at the mounting location to
make sure that the air conditioner operates from that
location. The indoor unit should make a beeping sound
to indicate that it has received the signal.
Remote control unit mount
Mounting screws
5/32 × 5/8" (4 × 16 mm)
(Included)
To take out the remote control unit, pull it forward.
Press
Set in
place
Fig. 61
24
Rear side
Hole
To prevent loss of the remote control
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C1872Cl1872Ks2472C2472Cl2472

Table of Contents